Milodon: Hellcat Front Sump Oil-pan

[Tuckerracing]

But weary about not spreading out the transmission load on the oil pan bolts

Holley has the part already out and available: Holley Oil Pan Supports 302-65

https://www.summitracing.com/parts/hly-302-65?seid=srese1

 

[Tuckerracing]

These are available from MMX.

https://www.modernmusclextreme.com/...port-mounts-by-modern-muscle-performance.aspx

 

[vortecd]

Mmx sure is proud of those. Holley is 3 times cheaper and better looking. Really how important are they? This is the 1st platform I have seen them even used

 

[Unholy707]

Hmm interesting, wonder if it will fit with that pan

 

[Tuckerracing]

They will fit the pan will just need to be trimmed, all the aftermarket/sheet metal pans have to be clearanced to use them. I believe it is only about an 1/8th of an inch. i have attached some pictures of there the pan needs to have some material removed.

 

[Tuckerracing]

Here is where the pan was trimmed so the rear supports could be used. Milodon will be making an adjustment to their tooling so the future pans are already notched to use the braces.

 

[Unholy707]

I wonder if the Holley one fits. The MMX ones are rediculous for what they are and have half the mounting points

Here is where the pan was trimmed so the rear supports could be used. Milodon will be making an adjustment to their tooling so the future pans are already notched to use the braces. View attachment 135694 View attachment 135695